|
Description
Developed in
Italy, Hotspot Marble Polish produces crystallisation action
between polish and marble which is accelerated by buffing and
temperature.
It is not
abrasive but modifies the chemical nature of the marble itself
to produce a rich long lasting sheen. Although the liquid can be
successfully hand polished, we recommend the use of a low speed
drill with lambswool polish attachment. |
 |
Directions for use
For best results work in
small areas and buff up immediately after polish has been applied.
Ensure the area around the marble is covered to prevent splashing.
-
Wear rubber gloves
-
Shake the bottle to
produce a milky white solution
-
Using a damp cloth,
apply approximately 100ml of polish per m², rub vigourously
-
Do not allow surface to
dry out
-
Polish with a damp soft
cloth or low speed drill with lambswool attachment
-
Wash off any residual
polish with water and buff again.
-
Sheen can be maintained
by regular wiping with a soft cloth
With black marble, extra
care must be taken to ensure polish does not dry on the surface or
misting will occur. Not suitable for synthetic marble.
|
