|
Ecofan Description
The Ecofan is a heat-powered stove fan
designed to circulate the air created by a wood or gas
stove. The
Ecofan has a thermoelectric module which acts as a small generator to
power the fan's motor.
For more than a decade now, wood
stove owners have been luxuriating in the heat and comfort generated
by their Ecofans. Now at last, gas stove owners too can enjoy all
the extra comfort and benefits of the revolutionary new Ecofan 806
Gas Stove Fan.
An engineering breakthrough now
enables the Ecofan 806 Gas Stove Fan to operate at the much lower
temperatures of a gas stove. |
|
-
Increases stove's
efficiency
-
Circulates warm air over
large areas
-
Generates its own energy
-
Fan speed automatically
varies with temperature
-
Ultra quiet operation
Ecofan Increases
Stove Efficiency
Warm air is circulated directly into the living area rather than having
most of the stoves heat rise immediately to the ceiling, thereby
increasing the heating effectiveness of the stove.
Ecofan Unique Blade Design
The unique anodised gold or nickel coloured blade has been specifically
designed to deliver a very broad cross section of gentle air movement
instead of a small cone of concentrated air.
Ecofan
Easy Operation
Ecofans start automatically and adjust speed with the stove's
temperature. As the stove heats up the Ecofan runs faster to move more
air into the room. As the stove burns down and cools, the Ecofan
automatically slows down and stops.
Ecofan Costs Nothing to Operate
Because the Ecofan uses only the heat from the stove, it is the most
economical way to effectively circulate the warm air. It does not plug
in, uses no batteries, and can be used where there is no electricity.
Ecofans are made from
anodised aluminium that will not rust. Bi-metal strips in the base help
prevent the fan from overheating.
-
The Original 800 model
is suitable for use on wood stoves, operating with normal surface
temperatures of between 205 degrees C and 345 degrees C. It generates up to 100 cubic feet
(of air) per minute. Dimensions:- Base Plate w100 d75
(4"x3"), h233 (9.25") from base to top of the blade, excluding
handle.
-
The Airplus 802 model is
suitable for use on wood stoves, operating with normal surface
temperatures of between 205 degrees C and 345 degrees C. It generates up to 150 cubic feet
(of air) per minute. Dimensions:- Base Plate w132 d75
(5.25"x3"), h270 (10.75") from base to top of the blade, excluding
handle.
-
The GS 806 model is
suitable for use on gas stoves, operating with normal surface
temperatures of between 65 degrees C and 150 degrees C. It generates up to 150 cubic feet
(of air) per minute. Dimensions:- Base Plate w162 d61
(6.4"x2.4"), h240 (9.5") from base to top of the blade, excluding
handle.
|
