A twin skin multi fuel flexible chimney liner used for relining masonry chimney stacks.
Outer corrugated layer provides a protective casing during the installation process and after installation it helps protect the inner layer from corrosion due to attack by residual deposits.The inner layer is smooth to discourage the build up of soot and other potentially corrosive residues and to encourage the unimpared flow of flue gasses.
Inner and outer layers are joined by the triple lock joint system. Acknowledged to be the best jointing system available, the triple lock joint provides strength and stability by distributing forces evenly round ther chimney liner. The overlapping joint construction protects the joint from the potentially damaging effects of condensation.
Inner Skin:- Stainless steel grade 316 or 904, 0.105mm thickness
Outer Skin:- Stainless steel grade 316 or 904, 0.105mm thickness
Triple lock jointing system.
The twin wall construction, with triple lock and overlapping joints, enables this chimney liner to withstand operational temperatures of up to 750° C and short fire temperatures of up to 1000° C. (e.g. A chimney fire. In the event of such an occurence, the future liner performance will be adversely affected)
This multi fuel chimney liner is HETAS approved.
BSRIA Type Test report No. 40143/1
Edition 5, November 2009 to BS EN1856-2: 2004 and BS EN 1443:2003.
10 & 20 Year Guarantees
Multi fuel chimney liner is guaranteed for 10 years or 20 years (replacement of product only), depending upon the grade.
This guarantee is subject to the following conditions:-
The appliance must be operating normally, set correctly, and using only good quality fuels from the specified list. The guarantee is not valid if refuse or any type of plastic is burnt, or if the appliance is located where any substance containing Chlorine or Fluorine can be drawn into the air intake.