Gas / Oil Flue Liner

Gas/Oil Flue Liner
A single skin flexible flue liner manufactured in stainless steel 316 to BS715, used for lining masonry chimney stacks. This flue liner is suitable for use when burning the following fuels:- gas and sulphur and proprietary additive free oils up to 28 second.

Adaptor Flue Liner to Pipe
Used to connect the flexible flue liner to rigid pipe at the base of the stack. The flue liner fits tightly into the adaptor and is secured with stainless steel self tapping screws and mastic.

Flue Liner Clamp Plate - Split Aluminium
A split aluminium plate used to support the flue liner at the top of the stack

Flue Liner Gas Terminal (GC1)
Gas regulation terminal. Gas fired appliances must have a gas regulation termination.

Flue Liner Oil Terminal
Used on oil installations. Provides rain protection at the top of the stack. This cowl has a clamped fixing system, which grips tightly around the flue liner as it protrudes through the clamp plate.

Flue Liner Birdguard - Gas
Very commonly used instead of the gas terminal or standard cowl - clamped.

Flue Liner Nose Cone
The nose cone is used during installation and then discarded. Attached to the leading end of the flue liner it helps prevent snagging against the side of the stack and also provides a draw cord from which the liner can be guided down.