EPDM or Silicone - to suit cold or hot pipes

Flexibility - allows for expansion, contraction and building movement

Special Sleeve Design - avoids retention of water

Simple to Fit - sleeve marked with pipe diameters.

For Sheeting and Cladding
Profiled sheeting or flat panel systems often require a flexible flashing, to provide a weather sealing for pipes, chimneys, flues and electrical services protruding through them. Aquarius pipe flashings are manufactured from rubber compounds of the highest quality, which are durable even in aggressive environments and able to withstand ultra-violet rays, insect or fungi attack, acid rain or moisture, over a wide temperature range. The flexible materials maintain a weatherproof seal allowing for pipe movement due to expansion, contraction or vibration.

The manufacturers state that under normal weather conditions these pipe flashings have a life expectancy in excess of 20 years.

To Suit Hot or Cold Pipes Aquarius pipe flashings are available in either EPDM or Silicone rubber materials. EPDM (Ethylene Propylene Diene Monomer) suits cold pipes, whereas Silicone rubber can withstand ultra high temperatures associated with flues and steam pipes.

Temperature Range EPDM Silicone Min. -40°C  (-40° F) Max. 115°C  (239°F) Min. -60°C  (-76° F) Max. 240°C  (464°F)

Aquarius - Simple to Install
Installation of all Aquarius flashings is so simple. The flexible base can be formed to suit virtually any profile and the purpose designed fixing kit includes detailed fitting instructions, along with fasteners, sealant and accessory items required for most sheeting and cladding applications. See additional information for details of kits required.

As the name suggests, adaptability is the key feature of this product range. In their standard configuration, Aquarius Aquadapt pipe flashings cater for most applications. Where obstructions, such as cowls, bends and brackets occur, the unique design of the flashing allows it to be simply cut open down the seam, wrapped around the pipe and then crimped together using stainless steel clips.

The square base design facilitates easy installation, especially on profiled material, where cutting perfectly round clearance holes is almost impossible. The ribbed configuration of the sleeve provides optimum flexibility but avoids retention of water around the skirt, which can attract airborne pollutants and lead to staining of the sheet material.

Each flashing suits a wide range of pipe sizes and the sleeve has pipe diameters marked on each rib as an aid to correct fitting. 

Base Dimensions (mm)	Pipe diameters (mm)		Quantity of RFC clips required (per flashing)	Product Code
	0° - 25° roof pitch	0° - 45° roof pitch		EPDM	Silicone
155 x 155	10 - 90	10 - 70	5	ADC-2	ADH-2
203 x 203	40 - 100	40 - 90	5	ADC-3	ADH-3
254 x 254	75 - 150	75 - 135	6	ADC-4	ADH-4
305 x 305	125 - 200	125 - 180	6	ADC-5	ADH-5
356 x 356	145 - 250	145 - 230	7	ADC-6	ADH-6
432 x 432	195 - 300	195 - 250	7	ADC-7	ADH-7
597 x 540	275 - 380	275 - 355	9	ADC-8	ADH-8
720 x 650	315 - 500	315 - 450	11	ADC-9	ADH-9
995 x 965	400 - 750	400 - 700	15	ADC-10	ADH-10
Note:- For square pipes or stanchions, use the following method to calculate the size of the flashing required. Add up the dimensions of all four sides and divide by 3.142. Select the flashing which will comfortably accommodate the resulting dimension